Even if it is strongly associated with the production of thermosetting polymers, the term "curing" can be used for all the processes where a solid product is obtained from a liquid solution, such as with PVC plastisols. Applications in construction, paints, adhesives and composites. Accredited at 23% biocarbon. For solvenfree floorings. s Some organic resins are cured with heat. E-Pos, E-Lix R, Q-RIT and BLUE FIN are registered trademarks, 2017-2022 QR Polymers - webmaster@www.qr-polymers.com, Sustainable Surf ECOBOARD LEVEL ONE label, Sustainable Surf ECOBOARD GOLD LEVEL label. From Wikipedia, the free encyclopedia. O VOC. For adhesives, mortars and primers. Cure monitoring relies on monitoring various physical or chemical properties. Grade 112 USP is our most popular USP prescription drug pharmaceutical ingredient product. Our product line is one of the most comprehensive offerings of epoxy and polyurethane intermediates produced in North America. A concrete curing agent forms a membrane over the top of the concrete slab while it cures. Store in a cool, dry and well-ventilated place. Applications include fertilizer, feed, ceramics, and all other applications except where a special zinc oxide characteristic is required or requested. Modified cycloaliphatic polyamine. Grade 103 USP offers the lowest m2/g surface area (SA) available with discrete French Process and is used when standard grade 112 USP is not suitable in the application. After placing the concrete, its exposed surface is first covered with moist hessian or canvas. applications except when a special product is requested or required. Sodium nitrite is an inorganic sodium salt having nitrite as the counterion. Provides flexibility and thoughness. To quote from IUPAC: curing "might or might not require mixing with a chemical curing agent. Good gloss retention. MagChem 200-AD is used as a thickener in sheet molding and bulk molding compounds and as a curing agent in neoprene/phenolic adhesives. Additive for polymers to improve: flame retardant-, thermo-mechanical-, barrier-and/or rheological properties. Weighing in at just over 5,000 lbs, our staff is more than just a few tons of pride, service and knowledge. Curing is a chemical process employed in polymer chemistry and process engineering that produces the toughening or hardening of a polymer material by cross-linking of polymer chains. Trigonox 101-45S-ps is mainly used for the crosslinking of silicone rubbers. This field is for validation purposes and should be left unchanged. Trigonox 117 can be used to crosslink elastomers at intermediate temperatures, a typical crosslink temperature is 150 C. Trigonox 117 is recommended for highly demanding applications e.g. Good substrate impregnation, outstanding adhesion to humid substrates and very good corrosion protection. As mentioned previously they can be combined with other curing agents for use in an extensive number of other applications, included to reduce viscosity and/or extend pot-life. The first type of curing agents includes active hydrogen-containing compounds and their derivatives. Q If youre ready to start curing, here are a few different processes worth considering. Good mechanical, acid and solvent resistance. Long pot-life, flexibility, good impregnation. Formulation of thick systems. https://encyclopedia2.thefreedictionary.com/Curing+of+Polymers, The characteristic of this curing system is that, unlike other curing systems of fluoroelastomers, that is, amine curing, which uses a polyamine compound as the crosslinking agent, and polyol curing, which uses a combination of a polyhydroxy compound and an onium salt, it exhibits its effects especially in the, Dictionary, Encyclopedia and Thesaurus - The Free Dictionary, the webmaster's page for free fun content, Curiosa et captiosa intepretatio in lege reprobatur. Salicylic acid-free. These cookies do not store any personal information. Isophoronediamine (IPDA). An approximate order of response by polymer is: NR > NBR > SBR > EPDM > IIR > CR. Long pot-life. (a) with a liquid resin (EEW 190), 100 g mix, measured @23C. s Good mechanical, acid and solvent resistance. Adhesion on humid concrete. Polyoxypropylenetriamine. Universal aqueous epoxy-polyaminoamide adduct without cosolvent, for concrete and metal coatings. Can emulsify epoxy resins. Very fast hardening and early water resistance. There are mainly three types of curing agents. Grade 800WSA is approved for pharmaceutical drug use as an excipient, is USFDA approved as GRAS (Generally Recognized As Safe) at Then the reaction continues and the system starts to react more like a solid: the storage modulus increases. Excellent flexibility, good humidity and corrosion resistance. Can be used on green concrete. Modified cycloaliphatic polyamine. Applications in construction, paints, adhesives and composites. This grade is used where very low impurities are required, and where increased zinc oxide reactivity provides application benefits. Use with high-solids or solid resin (phr 40, resin EEW 450-500). Trigonox T is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. Curing transforms the polymer into a more durable, resilient product. Curing agents or hardeners play an important role in the curing kinetics, gel time, degree of curing, viscosity, curing cycle and the final properties of the cured products. Applications in construction, paints, adhesives and composites. $3.00 / kilogram. Low viscous. Curing is the process or operation which controls the loss of moisture from concrete after it has been placed in position, or in the manufacture of concrete products, thereby providing time for the hydration of the cement to occur. It is capable of monitoring phase separation in complex resin blends curing also within a fibrous perform. Compounds containing Perkadox 14-40MB-gr have excellent scorch safety, under certain conditions one step mixing is possible. For solventfree and solventborne curing agents, see below. Grade 101 USPL offers ultra-low lead (the lowest lead attainable), with medium-high m2/g surface area (SA). Triethylenetetramine (TETA). Trigonox 29-40MB-gr is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. Dry Curing. [1], During the curing process, single monomers and oligomers, mixed with or without a curing agent, react to form a tridimensional polymeric network. Good substrate impregnation, outstanding adhesion to humid substrates and very good corrosion protection. P.Ciriscioli and G.Springer, Smart Autoclave cure in Composites, (1991), Technomic Publishing, Lancaster, PA. This grade is used in the glass, glazes, ceramics, and frit enamel industry and in applications where high bulk density and free flow is For solventfree self-leveling and trowelable floorings, mortars, patching compounds, adhesives and encapsulation systems. Both mechanisms may be used simultaneously in certain cases, for example, in the curing of epoxy resins with acid anhydrides in the presence of tertiary amines, which are used as catalysts. What is the shape of C Indologenes bacteria? In many cases, the resin is provided as a solution or mixture with a thermally-activated catalyst, which induces crosslinking but only upon heating. For waterborne curing agents click here. Amine-adduct, 70% solids in propylene glycol n-butyl ether. For solventfree paints, floorings, mortars or adhesives. Necessary cookies are absolutely essential for the website to function properly. All content on this website, including dictionary, thesaurus, literature, geography, and other reference data is for informational purposes only. s Both BLUE FIN 20 and 25 are two component systems, with a 2:1 by volume mix ratio with the hardener. UV-resistance. The degree of curing, 0 The term curing is generally used in the processing of plastics, varnishes, adhesives, and sealing compounds. Polyetheramine, Mw 400. Order) modified cycloaliphatic polyamine Ancamine 2519 epoxy resin curing agent. Silicone-free polymer-based air release additive for unsaturated polyester resins. Cures at up to 70% relative humidity. In this page you can discover 10 synonyms, antonyms, idiomatic expressions, and related words for hardener, like: zinc-oxide, thickener, , resin, red-lead, linseed-oil, thixotropic, plasticizer, epoxy and degrease. Fast curing. Polyetheramine, Mw 400. Provides high Tg. This website uses cookies to improve your experience while you navigate through the website. Diethylenetriamine (DETA). The inhibition of conjugational transfer of antibiotic resistance plasmid can be used to decrease the spread of antibiotic resistance plasmid in the environment. Perkadox CH-50 is easy to handle, easy to disperse and dissolves very quickly in unsaturated polyester resins and acrylic resins. These are as varied as ambient curing paints for metal or for concrete (industrial anticorrosion paints, marine anticorrosive primers, pipe coatings or tank linings), civil engineering applications such as self-levelling or trowellable floorings, mortars, concrete repair, concrete modification, tank laminating, or adhesives for tiles or concrete. Trigonox C-40B-pd is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. CTPI is most effective with thiazole and sulphenamide accelerator systems and the fastest curing polymers. Low temperature/high humidity cure. Excellent flexibility and adhesion. Good adhesion on metal and mineral substrates, including wet concrete. n The remaining molecules start to coexist with the macroscopic network until they react with the network creating other crosslinks. Accredited at 29% biocarbon. For use in composite materials (fiber reinforced laminates) or adhesives. This field is for validation purposes and should be left unchanged. Applications in construction, paints, adhesives and composites. The curing agent gets absorbed by the reaction and is integrated into the film's three-dimensional structure, contributing to the . For solventfree paints, floorings, mortars or adhesives. The process is not induced by additives. Curing serves these main purposes: It retains moisture in the slab so that the concrete continues to gain strength. Trigonox 145-45B-pd is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. Good colour stability, good chemical resistance. Superior chemical resistance. Uses. Superior chemical resistance. Surfboards produced using BLUE FIN 25, which also comply with minimum plant based or recycled content in the core, qualify to carry the. The standard mixing ratio for PDMS is 10-parts base elastomer and 1-part curing agent. All Rights Reserved**, Introduction to Biopolymers and Bioplastics, Characterization of Thermosets: 4 Part Video Series, Advanced Thermoset Cure Kinetics: 3 Part Video Series, Guest Post by Jeremy Pasatta, Advanced Polymer Coatings, Epoxy Curing Agents Latent Curing Agents for One Component Systems. What is the curing agent for epoxy? About H.M. Royal {\displaystyle \alpha } n For solventfree concrete primers, coatings and adhesives. {\displaystyle \alpha } Perkadox PM-50S-ps is mainly used for the crosslinking of silicone rubbers. For high-solids anticorrosion coatings and adhesives. Therefore, the mechanical properties of diglycidyl ether of bisphenol a (DGEBA) cured with either l-arginine, l-citrulline, γ-aminobutyric acid, l-glutamine, l-tryptophan, or l-tyrosine were investigated to determine the potential of amino acids . A curing agent can be defined as a substance able to participate in the chemical reaction between the oligomer, pre-polymer and polymer, to achieve the polymerization process and provide the final film. The curing methodology depends on the resin and the application. Which type of chromosome region is identified by C-banding technique? Long pot-life, flexibility, good impregnation. = For high-solids or solventfree anticorrosion coatings, sealers and coatings for condrete. Provides hardness, high Tg, excellent heat resistance. Removal of air (oxygen) is required for adhesives to cure. Product Line Cards. . Cycloaliphatic Amine Curing Agents: Product Classifications or Composition: Product Code: Note/Commentss: Key Properties (examples, other or custom modified systems are available) HEW: VISC: Gel Time (min) Mod PACM Polymer: 8080: PACM based, good solvent and heat resistance: 115: 500: 60: Modified Cycloaliphatic: 8264: Benzyl Free, PACM based . The needs of our customers will always come first. CTPI increases processing safety without affecting vulcanizate properties, aged properties, fatigue life, stain, discoloration, or porosity. Triethylenetetramine (TETA). The curing process can be monitored by measuring changes in various parameters: Ultrasonic cure monitoring methods are based on the relationships between changes in the characteristics of propagating ultrasound and the real-time mechanical properties of a component, by measuring: Gregory T. Carroll, Nicholas J. Turro and Jeffrey T. Koberstein (2010), Ullmann's Encyclopedia of Industrial Chemistry, https://en.wikipedia.org/w/index.php?title=Curing_(chemistry)&oldid=1130952935, the concentration of specific reactive resin species using. We provide full-service raw material supplies with speed and efficiency, so you receive cost-effective products that meet your production standards. For solventfree and solventborne curing agents, see below. For use in composite materials (fiber reinforced laminates) or adhesives. Curing refers to the technological process involving the addition of salt and nitrates and/or nitrites to different types of raw materials to produce the so-called cured food products. Use this grade where the lowest lead and highest SA is required and standard grade 112 USP is not suitable in the application. Amines are classified into aliphatic, alicyclic (Three Bond 2106), and aromatic amines according to the types of hydrocarbons involved, and the all are important curing agents for epoxy resin. For solventfree and solventborne curing agents, see below. An all acrylic polymer curing agent for Glassfibre Reinforced Concrete. Privacy Policy Contact ustoday for more product information or to request a quote. UV-resistance. Good substrate impregnation, outstanding adhesion to concrete and to humid substrates. For solventfree paints, floorings, mortars or adhesives. 1000 kilograms (Min . O VOC. Your email address will not be published. Tetraethylenepentamine (TEPA). f Amines are called monoamine, diamine, tri-amine, or polyamine according to the number of amines in one molecule. Perkadox BC-FF is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. Good heat resistance. This grade is widely used in tire and rubber, paint and coatings, in applications requiring an FDA approved substance, and in all other For solvenfree self-leveling floorings, and paints. It can keep the vulcanizate natural and vivid colors. Epoxy resin systems consist of two parts, an A and a B side. It is suitable for curing horizontal surfaces such as floors, roof slabs, road and air field pavements. Curing is the process of maintaining satisfactory moisture content and temperature in freshly cast concrete for a definite period of time immediately following placement. To clarify the influencing mechanism of superabsorbent polymer (SAP) internal curing agent on the carbonation resistance of cement concrete, accelerated carbonation experiment was conducted to explore the effect of particle size and dosage of SAP on carbonation depth. Properly cured concrete has an adequate amount of moisture for continued hydration and development of strength, volume stability, resistance to freezing and thawing, and abrasion and scaling resistance. Rapid build of hardness and other physical properties. Grade 102 USPL offers ultra-low lead (the lowest lead attainable), with the highest m2/g surface area (SA) available with high quality French Process material. The BLUE FIN 20 system has a guaranteed minimum biocarbon content of 20% when cured. However, the classification of salicylic acid as a CMR (carcinogenic/mutagenic/reprotoxic) substance has caused its use in formulated products to be re-assessed. Check the weather on the day you plan to pour and cure your concrete. This grade is used where lower impurities are required and is used in the chemical, tire and rubber, paint and coatings, and all applications Diethylenetriamine (DETA). [7], As shown in Figure 4, after an "induction time, G' and G" start to increase, with an abrupt change in slope. Our curing agents are of various types: unmodified and modified aliphatic or cycloaliphatic amines, epoxy/ (cyclo)aliphatic amine adducts, poly (amino)amides and their adducts, Mannich bases and various special curing agents, including waterbornes. Perkadox L-50S-ps is mainly used for the crosslinking of silicone rubbers. When paint is described as "drying" it is in fact hardening by crosslinking. This paper describes investigations on the effect of using water-soluble polymers (polyethylene glycol (PEG) and polyacrylamide (PAM)) as self-curing agents on the water retention, degree of. This category only includes cookies that ensures basic functionalities and security features of the website. Low temperature/high humidity cure. Outstanding corrosion protection when combined with solid resin. For solvenfree self-leveling and trowelable floorings, paints or adhesives. For solvenfree self-leveling floorings, and paints. Aqueous epoxy-polyaminoamide adduct without cosolvent, for concrete and metal coatings. UV-resistance. Superior chemical resistance. Can be used on green concrete. MagShield UF NB-10 is an ultrafine, flame retardant grade magnesium hydroxide (~1.0 median) treated with a stearate coating that is fully-bonded to the magnesium hydroxide to improve dispersion, handling and physical properties in compounded resins. Very good resistance to corrosion and chemicals. The hydration performance of internally cured concrete at different ages was studied by Fourier transform infrared spectroscopy . H.M. Royal: A Leading Provider of Curing Agents. We form strong bonds with our customers, Our 21 acre facility consists of 80,000 square feet of manufacturing and warehouse space. T With H.M. Royal as your adhesives supplier, you wont have to worry about the availability, delivery or quality of the rubber bonding agents you need. = In most cases a combination with other peroxides is used to ensure a broad reactivity range. Epoxy Curing Agents for Paints & Coatings. Curing of polymers may involve polycondensation (for example, the curing of phenol-formaldehyde resins) or polymerization (curing of polyester resins). Amides ( Benzyl alcohol-free. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); Arnette Polymers, LLC Trigonox 17-40B-pd-am is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. The . It is mandatory to procure user consent prior to running these cookies on your website. Underwater cure. Hardeners can be mixed in any ratio to fine tune reactivity. G Curing Agents. Can be used with additional plasticisers or super plasticisers. This product is also available with up to 1% oil treatment to reduce dusting and up to 2.5% conditioning agent to improve flowability. Flavoring agents flavor improvement, bacterial inhibition, color improvement, antioxidant function. Fast curing. Good mechanical and chemical resistance. Long pot-life, flexibility. High reactivity, low temperature cure. This information should not be considered complete, up to date, and is not intended to be used in place of a visit, consultation, or advice of a legal, medical, or any other professional. Trigonox B is an efficient initiator for the production of Low Density Polyethylene (LDPE). Low colour and high UV-resistance with good gloss retention. A summary of our main waterborne products can be found below. use of water-soluble polymers as self-curing agents in concrete has found several applications recently [1]. A curing agent can be defined as a substance able to participate in the chemical reaction between the oligomer, pre-polymer and polymer, to achieve the polymerization process and provide the final film. G i Long pot-life. The degree of crosslinking determines the rigidity and durability, as well as other properties of the material.[5]. General purpose high-solids curing agent for heavy duty coatings. Our curing agents are of various types: unmodified and modified aliphatic or cycloaliphatic amines, epoxy/ (cyclo)aliphatic amine adducts, poly (amino)amides and their adducts, Mannich bases and various special curing agents, including waterbornes. Very good corrosion protection. Trigonox 17-40B-pd is used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. An additional benefit of RD-0205WH is its inherent pseudoplastic nature, increasing the stability and resistance to settling of zinc rich paints with the zinc dispersed into RD0205WH without water. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. Good flexibility and adhesion, good substrate wetting, good temperature resistance. Crosslinking boosts the thermal stability and mechanical properties of the polymer. It has therefore been used for half a century as an accelerator in the formulation of amine-based hardeners for epoxy resins. The global curing agents market was valued at USD 4.26 Billion in 2021 and is anticipated to grow at USD 8 Billion by 2028, growing at a CAGR of 6.78 % during the forecast period 2022-2028. CURAMINE ketamine curing agents are recommended for use in high solids or low VOC maintenance and specialised marine coatings, flooring and adhesives. Salicylic acid-free, benzyl alcohol-free. For solvenfree self-leveling and trowelable floorings, and paints. Good blush resistance, improved cure and appearance, Improved film properties, excellent adhesion, compatibility and corrosion resistance, better primers and topcoats, Fast dry, good blush and corrosion resistance, Improved dry, blush and chemical resistance, Improved dry, blush and chemical resistance, HAPS free solvent, Good compatibility and cure, improved dry time and corrosion resistance, Expanded working temperature cure response, excellent water and environmental resistance, Low viscosity, low blush, high imidazoline, long pot life, Long working time, improved adhesion and compatibility, General purpose, lower cost version of 8055, moderate cure rate, medium imidazoline, Faster cure, pure (unmodified) amidoamine, low imidazoline, Shorter working time, improved cure response cold damp, Short working time with improved cure response, cold damp, Modified amidoamine, improved cure response, MILSPEC, Modified amidoamine, improved blush and cure, Modified amidoamine, improved blush resistance and cure response, higher gloss, low viscosity, Good blush resistance, good cure response, Good cure response, water spot resistant, phenol free, Lower viscosity, fast cure, underwater cure, accelerator, Damp wet bonding, slower cure, low modulus, Damp wet bonding, cold cure, good bonding wet, Fast cure, good color gloss, color retention, Workhorse cyclo mannich base, low temp cure, Aliphatic Amine Curing Agents and Accelerators, Economy based ethyleneamine blend, replace AEP in some systems, Fast Cure, Rapid Development, Low Viscosity , High Modulus, Good Resistance, Aliphatic Amine, rapid set, high strength, high chemical resistance, Modified aliphatic amine/ Bisphenol A Adduct, Aliphatic Amine, rapid set, high strength, accelerator, Modified aliphatic amine/Bisphenol A Adduct, Low cost, higher color, rapid set, high strength accelerator, Very fast set, low temp, used as accelerator, Safety Hardener, general purpose aliphatic amine, Fast Set, low viscosity, good toughness, also economical version 8210AF, Modified amine, 1:1 by volume, also AEP free systems 8211AF, 8210AF, High solvent resistance and acid resistance, Very low color, modest cure rate, low blush, Good Cure Reponse, Benzyl Free , low blush , Good Solvent/Chemical Resistance, Good Cure response, Good General Performance, 40% Active in Ethanol , used to improve film set and dry time, Solvent Free version, same benefits as above, not flammable, (examples, other or custom modified systems are available), PACM based, good solvent and heat resistance, Benzyl Free, PACM based, Good Solvent and Heat Resistance, Good balance of properties, fast thin film set, Benzyl Free , Fast and Low Temp Cure, good aesthetics, IPDA Free Cycloaliphatic, Good Cure Response, Benzyl Free, BPA Free, Fast and Low Temp Cure, Low viscosity, excellent cure response, good impact, Low viscosity accelerated for general purpose, PACM based, low color, good solvent and heat resistance, High thermal and chemical resistance, plasticizer free, Low viscosity, good balance of properties, Modified cycloaliphatic, economy based cyclo, Accelerated cycloaliphatic amine, low viscosity, IPDA based, General purpose, lowest viscosity IPDA Hardener, General purpose IPDA based cyclo for high gloss, Low viscosity, improved cure response and blush resistance, General purpose, lowest viscosity IPDA hardener, Workhorse cycloapliphatic amine, fast cure response, economical, Low blush, excellent gloss , low yellowing, Diaminocyclohexane based amine adduct/blend, Good cure response and gloss, also 8384AH economy grade, Good cure response, benzyl free, low blush, good solvent and chemical resistance, Modified cycloaliphatic amine, low temp cure, Good Early Water Spot Resistance and cure response, Low emission hardener, improved UV resistance, Improved UV stability, good impact resistance, Low viscosity, excellent mechanical properties, long pot life, Best efficiency, best properties, sensitizer, o-CGE, retards crystallization, good maintenance of properties, Lower tendency for crystallization with epoxy, General purpose, potting, laminating, adhesives, 1,4 BDO DGE, efficient visc reduction difunctional, TMP TGE, fast curing, chem resistant, high mechanicals, Castor TGE, flexilizing modifer, renewable ingredients, difunctional with good mechanical properties, Aromatic difuntional diluent, high Tg, high strength, NPG DGE, efficient difunctional lower skin sensitization difunctional, best chemical and solvent resistance, high mechanical properties, Water Dispersible BLR, with reactive diluent, Water Dispersible BLR, without reactive diluent, High Molecular Weight (9 type) dispersion, EB/EP Cosolvent, Cosolvent free, fast dry, improved adhesion, good crosslink density, Cosolvent free semi solid epoxy resin , faster dry, improved adhesion and flexibility, WB Polyamine Adduct, good cure response, low color, Precatalyzed Aliphatic polymercaptan, 5 min cure/ gel, Precatalyzed Polymercaptan, improved water resistance & low temperature cure, 5 min cure/ gel, Precatalyzed polymercaptan, faster cure, (30-45 seconds), accelerator and adhesiion promoter to glass and steel, (below are examples, other or custom solutions available), Type 1 solution Aromatic 100, easy to use, higher flashpoint semisolid epoxy, Type 1 solution cut in A-100 and EB, easy to use, higher flashpoint semisolid epoxy, Type 1 solution , propylene glycol methyl ether, Type 1 solution in tBAC, fast dry, medium evaporating solvent, Type 7 solution in Propylene glycol methyl ether Acetate, Type 7 cut in PM and Toluene blend, excellent flexibility, Type 9 cut in EB, excellent flexibility, slow evaporating solvent, Type 9 Cut (also available in PMA, EB, or other solvents), High molecular weight Bis F Resin 40% MEK, Excellent flexibility, improved hot water resistance, High solids, improved adhesion and dry time, Semi Solid DGEBPA solution in Aromatic 100, Easy to use, higher flashpoint semisolid epoxy, Improved adhesion and cure , resistance, bake coatings, Hi Solids with Type 1 dry and flexibility,in MIBK and Xylene, Low VOC , good flexibility, improve adhesion, slower evaporating solvent, Fast dry, low viscosity profile, higher solids, semi solid polyamide in exempt solvent blend, Fast dry, corrosion resistant primers, coatings, 115 type polyamide in exempt solvent blend, VOC compliant primers, corrosion resistant coatings, Medium viscosity, good pigment wetting, reduced tendency to crystallize, BPADGE, lower reactivity, lower viscosity, Easier handling, better crystallization resistance than standard LER, Standard DGEBPA resin cut in Dibutyl Phthalate, Good film former, improved film cure, improved flexibility over standard resin, Very low visocosity fast cure, flexibility and gloss, Improved cure response, cures down to 35F, modest viscosity, Low viscosity, crystallization resistant good properties, LER -modifified with polyglycol diglycidyl ethers, Moderate Viscosity and Reactivity, improves impact and chip resistance, 2 phase systems, improved adhesion, thermal shock and toughness, 2 phase systems, same as 7213LV, but higher tensile and modulus, 2 phase systems, high impact, improved adhesion, elongation, Novolac modified butadiene - acrylonitrile, 2 phase systems, toughening, higher viscosity, high elastomer, improved peel strength, 2 phase systems, improved adhesion, good compatibility, Improved adhesion to vinyl and olefin substrates, Good thermal shock, improved adhesion to vinyl, Urethane modified epoxy , good cure response and flexibility, 2 phase systems, toughening, 5% elastomer, Long pot life, inherently tough, highest elongation, Moderate reactivity, inherently tough, higher elongation, Hybrid hindered amine, excellent balance of hardness, chemical resistance, working time, inherently tough, Hybrid Hindered Amine excellent balance of hardness, chemical resistance, working time,inherently tough, 85% NV in PMA, maximum working time, low viscosity, High Reactivity, hard segment for plural systems, High Reactivity, hard films, accelerator or spray, Slow reactivity, Hard Films, often blended with 420, 140, and 145 to increase working time, 1,3 Oxazolidine(hydroxy ethyl Oxazolidine), Building block for modified 1,3 Oxazolidines, scavenger, Urethane bis Oxozolidine, 4 functional, single pack and 2K, Blend of LV and Arnox 4, providing low viscosity and higher freezing point, Blend of LV and Arnox 4, providing higher freezing point, Low viscosity, 4 functional.

Ernest Chan Net Worth, Accident On Dundee Road Today, Stryker Interview Presentation, Articles C